When the working parts of the machine tool using miniature linear guides move, the steel balls circulate in the grooves of the bracket, and the wear of the bracket is distributed to each steel ball, thereby prolonging the service life of the linear guide. In order to eliminate the gap between the bracket and the rail, the preload can improve the stability of the rail system. The preload is obtained by installing an oversized steel ball between the rail and the bracket. The diameter tolerance of the steel ball is ±20 microns, with 0.5 micron increments. The steel balls are screened and classified and installed on the guide rails respectively. The size of the preload depends on the force acting on the steel balls. If the force acting on the steel ball is too large, the steel ball will withstand the preload for too long, which will increase the movement resistance of the bracket. There is a balance problem here; in order to improve the sensitivity of the system and reduce the movement resistance, the preload must be reduced accordingly, and in order to improve the movement accuracy and the retention of precision, it is required to have sufficient preload negative numbers, which are contradictory two. aspect. The design of the guide rail system strives to have the largest contact area between the fixed element and the moving element. This not only improves the carrying capacity of the system, but also the system can withstand the impact force generated by intermittent cutting or gravity cutting, spread the force widely, and expand the bearing capacity. The area of force. In order to achieve this, the groove shape of the guide rail system has various shapes, and there are two representative ones, one is called the Gedai type (pointed arch type), the shape is a semi-circular extension, and the contact point is the apex; One is circular arc shape, which can also play the same role. No matter what kind of structure, there is only one purpose, and strive to have more rolling steel ball radius contact with the guide rail (fixed element).
Der Faktor, der die Leistungsmerkmale des Systems bestimmt, ist: Wie die Wälzkörper die Führungsschiene berühren, was der Schlüssel zum Problem ist. Streben Sie danach, die größte Kontaktfläche zwischen dem feststehenden Element und dem beweglichen Element zu haben, was nicht nur die Tragfähigkeit des Systems verbessern kann, sondern das System auch der Stoßkraft widerstehen kann, die durch intermittierendes Schneiden oder Schwerkraftschneiden erzeugt wird , verteilen Sie die Kraft weit und erweitern Sie die krafttragende Fläche. Um dies zu erreichen, gibt es verschiedene Nutformen für das Führungsschienensystem. Es gibt zwei repräsentative. Einer wird als Gedai-Typ (Spitzbogentyp) bezeichnet, die Form ist eine halbkreisförmige Verlängerung und der Kontaktpunkt ist der Scheitel; die andere Die Art ist bogen-förmig und kann auch die gleiche Rolle spielen.
Why not give us a linear challenge?
